​List of papers

1. Reconsidering Shoulder Type for Low Volume Concrete Roads

2. Chemo Mechanical Properties of Synthesized Tricalcium Silicate

3. Effect of nominal maximum aggregate size on fatigue damage in concrete

4. A Study on Concrete Pavement Growth

5. Short Continuously Reinforced Concrete Pavement Structural Model

6. Model for Airfield Pavement Resiliency against Extreme Dynamic Events Analysis

7. Organosilane and Lignosulfonate: Road Subsurface Layers Stabilizers

8. Effect of Plastic Subgrade on Full Depth Reclamation Mix Design

9. Soil Stabilization using Cement and Polyelectrolyte Complexes

10. Electrokinetic Treatment of Clay Soil - A Baseline Case Study Intro

11. High Strength and Good Durability of Stabilized Dolomite Fines

12. Simulation of Granular Material in Distinct Element Model Based on Real Particle Shape

13. Effect of Thresholding Algorithms on Pervious Pavement Skid Resistance

14. Investigation of the Motion and Flow Field of a Wheel Tracking Device

15. Overview of Pavement Vehicle Interaction Research at the MIT Concrete Sustainability Hub

16. Parametric and Sensitivity Analysis of PVI-Related Surface Characteristics Models for Fuel Consumption

17. Measurement of Structural Rolling Resistance at Two Temperatures

18. Mechanistic Modeling of Macrotexture's Effect on Rolling Resistance

19. Modified Area Under Pavement Profile for Light Weight Deflectometer Measurements

20. New Methods of Structural Assessment on Project Level

21. Towards a Mechanistic Empirical IRI Prediction

22. A Parameter Backcalculation Technique for Pavements Under Moving Loads

23. Effect of Seasonal and Daily FWD Measurements on Back-calculated Parameters for Pavements – LTPP SMP Study

24. Monitoring Asphalt Pavement Behavior Through In Situ Instrumentation

25. Pavement Instrumentation with Near Surface LVDTs

26. Study on the Health Monitoring Technology of Saline Soil Subgrade and the Distribution Law of Subgrade Water Temperature

27. Evaluation of Pavement Service Life Reduction in Overload Corridors

28. Evaluation of Reflective Cracking in Composite Pavement Based on Different Rheological Models

29. Assessment of Reflective Cracking Performance Life for High Polymer-Modified Asphalt Overlays

30. Layered Nonlinear Cross Anisotropic Model for Pavements with Geogrids

31. Calibration and Validation of the Texas Mechanistic - Empirical Flexible Pavement Design Method

32. Dealing with Non Uniqueness of Calculated Asphalt Pavements Responses

33. Experimental Performance of Buried Concrete Culvert under Flexible Pavements Subjected to Heavy Dynamic Loads

34. Mechanistic Damage Analysis of Pavements: Concept and a Case Study

35. Highlights on Interesting Findings of High Modulus Asphalt Concrete (HMAC/EME) for Cold Regions in Cooperative Research Project

36. Characterizing Low Temperature Field Produced Mix Performance in Iowa

37. Postmortem Evaluation of In-service Raveled Pavements in Arid Climatic Regions - Case of Kuwait

38. Investigation of Cracking Performance of Asphalt Mixtures in Missouri

39. HMA Characterization Under Different Egyptian Design Conditions

40. Effect of Load Eccentricity on Uniaxial Fatigue Test Results for Asphalt Concrete Mixtures Using FE Modeling

41. Multiscale study of the fracture properties of asphalt materials

42. Energy Dissipation Approach to Quantify the Fatigue Damage of Glass Fibre Grid Inlaid Asphalt Mixture

43. Determining Fracture Properties of Reclaimed Asphalt Pavement-Based Cement Mortar Using Semicircular Bending Test

44. Imroved Testing and Analysis of Uniaxial Tension Fatigue Test

45. Volumetric Effects on Asphalt Fatigue Performance from VECD Theory

46. Development of a Damage Growth Rate Based Fatigue Criterion

47. A Dissipated Energy Approach for Flow Number Determination

48. A Step Towards a Multiscale Model of Frost Damage in Asphalt Mixtures

49. Mix Design and Linear Viscoelastic characterization of Fine Aggregate Matrix (FAM)

50. Asphalt Mixture Compaction in Gyratory Compactor Using Bullet Physics Engine

51. Constitutive Properties of Materials from Digital Image Correlation

52. Design of Poroelastic Wearing Course With the Use of Direct Shear Test

53. Simulation of Performance of PA Mixtures with Different Mastics

54. Challenges in the Generation of Two Dimensional PFC Microstructures

55. Micromechanical Modelling of Porous Asphalt Mixes at High Temperatures

56. Evaluation of Emerging Performance Tests and Pavement Performance Prediction Models Using the FlexPAVETM Software

57. Evaluating Effects of Volumetric Properties on Asphalt Rutting Using SSR Test

58. Rutting Resistance and High-Temperature PG of Asphalt Mixtures

59. Quantification of Workability of Bituminous Mixtures using an Improved Workability Meter

60. Laboratory Permeability Testing of Chipseal Road Surfaces

61. Design of Rubberized Asphalt Mixtures for Noise and Vibration Damping

62. Assessing Permanent Deformation of Reclaimed Asphalt Blended Binders Using Non-Linear Viscoelasticity Theory

63. Rejuvenation of Reclaimed Asphalt Pavement (RAP) Binder Using the Design of Experiments

64. Modeling Changes in Asphalt Mixture Properties with RAP Content

65. Determining Optimum Doses of Palm Oil Rejuvenators for Recycled Blends

66. Effect of Recycling Agents on the Homogeneity of High RAP Binders

67. Effectiveness of Polymer Modified Emulsion Based Rejuvenator

68. Impacts of Unblended Reclaimed Asphalt on Volumetric Mixture Design

69. Stress-Strain-Time Response of Emulsified Cold Recycled Mixture in Repeated Haversine Compression Loading

70. Mix Design Approach of Cold Mix Asphalt using Response Surface Method

71. Effect of Biochar on the Basic Characteristics of Asphalt Mixtures

72. Low Density Polyethylene for Asphalt Binder Modification

73. Sensitivity Analysis of AASHTOWare PMED to Climatic Inputs and Depth of Water Table

74. Sensitivity Analysis of Simplified Viscoelastic Continuum Damage Model

75. On Uncertainty in Asphalt Binder Unit Response Mastercurves

76. Pavement Performance Prediction Using Mixture Performance-Volumetric Relationship

77. Impact of WIM Systematic Bias on Axle Load Spectra A Case Study

78. Effect of Uncertainty in Dynamic Modulus on Performance Prediction

79. Neural Network Models for Flexible Pavement Structural Evaluation

80. Development of Machine Learning Performance Prediction Models for Asphalt Mixtures

81. Characterization of Road Fleet Weight Using Big Data Tools

82. Digital Twinning of Asphalt Pavement Surfacings Using Visual Simultaneous Localization and Mapping

83. Dissolution Simulation of Polymers in Bitumen

84. A Review of Asphalt and Aggregate Interface Behavior Studies Using MD

85. Asphalt Complex Modulus and Phase Angle by Equilibrium Molecular Dynamics

86. Molecular Dynamics Simulation of Tensile Failure of Asphalt Binder

87. A Review of Molecular Dynamics Simulation Based Asphalt Self-Healing Property Studies

88. Macroscopic Evaluation Method for Adhesion Performance of Warm Mix Asphalt Based on AFM

89. Assessment of Different Long-term Aging Effect on FAM Mixtures

90. Kinetics of Epoxy Asphalt Oxidation

91. Preliminary Study on Using Lignin as Aging Inhibitor in Bitumen

92. Limitations of Sulfoxide Index as a Metric to Quantify Asphalt Aging

93. Oxidation Simulation of Thin Bitumen Film

94. Aging Differences Within RAP Binder Layers

95. Laboratory and Field Ageing of Asphalt Mixtures

96. Effect of Aging on the Molecular Structure of Bitumen

97. Large Amplitude Oscillatory Shear of Modified Asphalt Binder

98. Geometric Nonlinearities of Bituminous Binder and Mastic using Large Amplitude Oscillatory Shear (LAOS)

99. Fourier Transform Rheology of Asphalt Binders

100. Quantification of Temperature Susceptibility of Bitumen Using Large Amplitude Oscillatory Shear

101. Importance of Triaxial Stress State on Asphalt Binder Tensile Failure

102. Microscale Observations of Fatigue Damage Mechanism in Asphalt Binder

103. Improved Test Method for Low-Temperature PG of Asphalt Binders

104. Discrete Fracture Modelling of Rubber Modified Binder

105. Stress Decomposition of Nonlinear Response of Modified Asphalt Binder Under Large Strains

106. Evaluation of Models for Binder Dynamic Shear Modulus and Phase angle

107. Application and Evaluation of NovaSurfacing Technology

108. Field Performance Experience of Sulfur Extended Asphalt (SEA) Pavement in Saudi Arabia

109. Towards the Application of Drones for Smart Pavement Maintenance

110. Microwave Heating Simulation of Asphalt Pavements

111. Application of Phase Change Self Regulating Temperature Material in Asphalt Pavement

112. Influence of Nanoclay in Viscosity Graded Asphalt Binder at Different Test Temperatures

113. Influence of Filler-Binder ratio and Temperature on the Linear Viscoelastic (LVE) characteristics of Asphalt Mastics

114. Nanomaterial to Resist Moisture Damage of Pure Siliceous Aggregates

115. Aggregate Properties Affecting Adhesive Quality in Asphalt Mixtures

116. Investigating the Factors that Influence the Asphalt Aggregate Bond